|
LADDER BARS
These are real bars for real trucks that are serious about performance, you have to weld these on,
the only way it should be.
|
|
|
|
We use 1.5 and 1.25 diameter DOM tubing to craft these bars. The welds are all done by TIG, the tube ends are chromemoly
steel. 100% in house design and manufacturing.
|
|
|
|
|
|
The front pivot assembly features a high durometer urethane bushing, this absorbs shock loads and vibration.
The assembly is all TIG welded and made from 1/4" steel plate.
|
|
|
|
|
|
The rear housing mounting brackets are designed to accommodate stock
height, lowered and lifted trucks as well. Unlike other designs these feature adjustment holes, and the plates can be flipped
over, to further offset from the axle tube centerline. All this is designed to keep the bars lower tube as close to level with
the ground as possible. Standard brackets are for the 4" axle tube diameter, we can build these for any diameter you
have.
|
|
|
|
|
|
Features distinct "M" insignia to let the crowd know
you are serious about performance. As with all other components this is also TIG welded for the highest strength and quality.
|
|
|
|
|
|
We aren't just messing around with these bars, we are serious about strength and function. These 3/4" chromemoly
rod ends are rated for over 12 tons in strength. For you high articulators, additional parts are available to add more
flex to these rod ends. We also include rod end seals for both sides of the joint. When you do a direct comparison to anything
else on the market, you will find a huge stack of features and improvements that the other guys just didn't bother with.
|
|
|
